perma PRO C MP-6 is suitable for the lubrication of roller- and sliding bearings, linear guides, open gears, spindles, motor shaft seals, generators, pumps, fans and linear guide systems (with same size runner blocks) in robots. Applications can be found in all types of industries: from steel to paper, heat and power stations, from mining to automotive.
Setting via push button with display and LED
- Easy configuration
- Display of remaining volume and active outlets
- Status control on display
MP-6 distributor with 6 outlets – Number of active outlets can be user-defined
- Supply of 1 to 6 lubrication points with same lubricant amount
- Precise supply of lubrication points
- Monitoring of lubrication point status
Pressure build-up to 25 bar allows remote mounting up to 5 m per outlet
- Mounting outside of dangerous areas increases workplace safety
- Higher equipment availability since LC can be exchanged during running operation
- Lubrication point can be purged to clear blockages
| Drive | Electromechanical |
|---|---|
| Power supply | External: 15–30 V |
| Housing | Metal / Transparent plastic |
| Discharge period | 1 day to 24 months |
| Lubricant volume | 250 cm³, 500 cm³ |
| Operating temperature | -20 °C to +60 °C |
| Pressure build-up | 25 bar |
| Number of outlets | 1 - 6 |
| Lubricants | Grease up to NLGI 2 |
| Max. tube lengths | 5.00 m |
| Impulse controlled | ✓️ |
| CE | ✓️️ |
Further information & contact
Our staff will be happy to advise you at any time. Commonly asked questions regarding this product are available in the FAQs section.
